Tinted is a Soybean‑oil‑based wood stain.  They dry by oxidation rather than evaporation, so their drying and curing times can vary widely with application thickness and environmental conditions; in practice you can expect thin wipe‑on coats to become

touch‑dry 2–6 hours
light recoat 8–24 hours
full cure 7–30 days

You should topcoat a Tinted stain with a compatible Tinted clear finish—matte, semi‑gloss, or gloss—not only to protect the stained surface but also to control appearance and wear characteristics. A clear topcoat seals the stain (preventing rub‑off and blotching), adds scratch resistance, and stabilizes the color against UV and moisture; choosing matte, semi‑gloss, or gloss changes how light interacts with the wood grain and how durable the surface will be. Matte (low sheen) minimizes reflections and hides surface imperfections, making it a great choice for furniture or walls where a soft, natural look is desired, but it shows wear and scuffs sooner than glossier finishes and can be harder to clean. Semi‑gloss offers a balanced look with moderate reflection, improved abrasion resistance, and easier cleaning—ideal for cabinets, doors, and trim. Gloss produces the highest reflection, visually deepens color and grain contrast, and gives the most durable, washable surface, so it’s preferred for high‑traffic items like floors, tabletops, and stair rails; however, it also highlights surface flaws and brush marks. Apply thin even coats to the surface while letting the stain dry in between layers until you reach the desired color.

Maintaining a soybean‑oil wood stain focuses on protecting the finish, cleaning gently, and repairing wear promptly to preserve appearance and longevity: routinely dust or dry‑wipe the surface with a soft cloth, clean spills quickly with a damp (not wet) cloth and mild pH‑neutral soap when needed, and avoid harsh chemicals or abrasive pads that will abrade the clear topcoat; for kitchen or high‑contact surfaces, wipe daily or after use, for furniture weekly, and for low‑use items monthly. If you used a clear topcoat (matte, semi‑gloss, or gloss), follow that product’s care guidance—glossier surfaces tolerate more frequent wet cleaning and scrubbing, while matte surfaces show wear more easily and benefit from gentler care. Address scratches or worn spots by lightly abrading the area with fine abrasive (0000 steel wool or 320–400 grit sandpaper depending on sheen), clean the dust, then reapply a thin coat of the same compatible finish (or a touch‑up product recommended by the manufacturer); allow full cure before heavy use. For exterior projects, keep surfaces clean, inspect annually for UV degradation or moisture damage, recoat with a UV‑resistant varnish or spar urethane as needed (often every 1–3 years depending on exposure), and ensure joints and end‑grain remain sealed. Always avoid placing hot items or prolonged water contact on stained surfaces, use coasters and pads, and maintain stable indoor humidity to reduce movement and finish stress. Finally, keep and follow the manufacturer’s product data sheet for specific cleaning products, recoat windows, and repair procedures, and test any cleaning or touch‑up method on an inconspicuous scrap or hidden area before treating the whole piece.